There are four different methods you can use to make soap.
Melt and pour (M&P)
- You can buy the soap base already made (from soaping supplies shops) so the process of making soap is simplified;
- To make the soap cut the base into cubes, melt them in the microwave oven or double-boiler and add oils or butters, colours, fragrances or embeds to make them more luxurious;
- Pour the soap into moulds, let to cool and harden, and you can use in 1 or 2 days;
- It’s the easiest soap making method, and you can make it with children as you don’t have to use dangerous substances such as Sodium Hydroxide;
- It’s great for soap making parties, either with children or just adults, like birthday parties, hen parties, team buildings.
Cold Process (CP)
- The soap is made from scratch from oils, butters, water and Sodium Hydroxide;
- The ingredients are mixed and emulsified with a hand mixer (a high shear mixer is needed, preferably one with at least 600W power);
- The soap is fragranced with essential or fragrance oils and coloured with natural or man-made colours and then poured into a mould;
- The soap must cure for 4 to 6 weeks before you can use it.
Hot Process (HP)
- The soap is made just as in the case of the cold process method from scratch with oils, butters, water and Sodium Hydroxide (NaOH) for soap bars and Potassium Hydroxide (KOH) for liquid soap;
- You can use the same recipes as for cold process soap, but instead of pouring them in the mould you “cook” them, therefore the soap is hot processed;
- Mix and emulsify the ingredients and then cook the soap in a crock pot or double boiler/Bain Marie;
- The heat of the cooking process will accelerate the saponification and evaporate the water;
- Because the water will evaporate during cooking the soap will be a thick paste after it’s cooked and it will be too thick to mix with different colours and make patterns or swirls;
- HP is great if you want to make soap that you can use fast (if for example you run out of soap) but not if you want to make decorative designs. So it’s a matter of convenience over beauty;
- You don’t need to wait for 4-6 weeks for the soap to cure, you can use it after 1 to 2 weeks.
- Re-batching is the method of “re-making” soap by cooking it;
- You can use either soap shavings with a small quantity of water (just enough to allow it to cook, the water will evaporate) to make a new batch of soap;
- You can use this method with leftover soap and soap shavings;
- You can re-batch cold process soap which didn’t turn out well (if the soap is lye heavy, it’s split, it lost its fragrance, etc);
- Just as with hot process soap you can use the re-batched soap after 1 to 2 weeks.
Note: if you use a new formula to make soap, always check it in a soap calculator first and write it down. This way you can re-batch the soap and use it instead of throwing it away if something goes wrong. If you don’t have the formula you won’t be able to recalculate the quantities of ingredients, and see what needs to be added (either oils or lye, and how much).
Write down the weight of ingredients when you add them too. Sometimes the formula is correct, but the incorrect quantity of ingredients was added due to mis-measurements during weighing.
During this course we will be learning to make soap with the cold process method, and we will be discussing the rebatching method in Module 18 – What happens when things go wrong.
Once you have completed an Unit please press the green “Mark as completed” button at the bottom of the Unit. This must be done in order to be able to move onto and view the next Unit. Once you have read all the Units and completed all the quizzes, you can download a PDF certificate of completion. To do this, first make sure you have pressed the green button: “Mark as completed” at the end of all of the Units. (On the page listing all Units, a green tick will appear on the right hand side of a Unit indicating that that particular Unit has been completed). When every single Unit and quiz has been completed, you will see a green “Download certificate” button at the bottom of every Unit which you can press to automatically generate a certificate of completion. If your name is not properly displayed on the certificate, you can change your name by going to: https:/naturalsoapworkshop.com/account/edit-account/